MANNOL Ceramo Ester 9829 Ceramic Technology Anti-Friction Additive 250 ml
Need more information?
Call us at 210 29 11 250
Description
Innovative engine protection additive based on synthetic esters (Group V oils) and hexagonal boron nitride h-BN micro-particles (white graphite). It is an anti-wear and anti-friction additive for engine oils without wet clutches. Suitable for all engine types – diesel and gasoline, four-stroke and two-stroke – and for all lubricant types: mineral, semi-synthetic, synthetic, including ester-based oils. Ideal for tuning and high-performance cars.
It is a stable suspension of micro-powder resembling graphite in ether.
The ester molecules in the additive bond magnetically to metal surfaces due to their distinct polarity and form a dense and highly stable oil film, while the ceramic micro-particles smooth surface irregularities and effectively dissipate heat. This prevents direct contact between metal surfaces and wear of separate components even under the most extreme operating conditions. Dry friction during cold starts is prevented, especially at sub-zero temperatures, thereby minimizing wear during engine start-up.
The boundary layer formed during product application has the following properties:
- resistance to extreme pressure - allows the engine and/or transmission to operate under increased loads without negative consequences.
- excellent anti-wear and anti-friction properties, which significantly increase the service life of the engine and/or drivetrain and significantly reduce fuel consumption and engine noise.
- anti-corrosion and anti-oxidation properties.
The additive gives the oil the following properties:
- prevents dry friction.
- reduces evaporation, lowers CO2 emissions, and extends oil service life.
- improves thermo-oxidative stability, increasing resistance to aging and degradation and thus extending oil change intervals.
- improves low-temperature properties, greatly facilitating cold starts.
- improves detergent and dispersant properties, preventing varnish, resin, and sludge deposits, which increases the service life of the engine and/or transmission and the oil itself.
Compatibility:
- Compatible with all materials, particle filters, and finer oil filters (for fine filtration): particle size (not more than 0.5 μm) ensures free passage through all filters and prevents deposits.
- Compatible with catalytic converters, all types of turbochargers, and all injection systems, including common rail.
Application: Shake and add to the oil in a ratio of 300 ml per 5 L.
Warning! Not suitable for use in equipment with wet clutches.